Carrier Rings are used :
- When flanges are not sufficiently thick for tapings.
- On Lined Pipe Lines
- Used with composite flanges
- Where pipe tapings are not practical.
Various Orifice Assemblies
Type CR1
This Carrier Ring is made from solid one piece, Orifice plate is part of this carrier Ring. Tapping position is fixed at the time of manufacturing and can not be changed afterwards. These are manufactured for line size 15NB on wards. Tap type is corner tap.
Type CR2
Orifice Plate can be changed whenever necessary. Annular chamber improves the pressure signal. Tap type is corner tap.
Type CR3-1 / CR3-2
Carrier ring is provided with Transmitter Pad. (CR3-1) Transmitter can be directly mounted on the pad. 3 Valve Manifold also can be used to mount Transmitter. (CR3-2). No need of piping. Less number of joints elements leakage possibilities. Model is very compact. Orifice plate can be a part of Carrier Ring or can be provided separately and screwed on the carrier ring. Tap type is corner tap.
Type CR4
Used for By Pass Rotameter. Tap type is flange Tap. Orifice plate can be changed if required. Tap position can be changed.
Type C-RTJ-1 & 2
Used in all flange applications. Orifice Plate is an integral part of Carrier Ring (C-RTJ1). Orifice Plate can be provided separately and screwed on the carrier ring (C-RTJ-2.)